The most popular and most likely the most convenient upgrade task for PC lovers are still the installation of a brand-new tough drive. It’s just a matter of time prior to terabyte-eating applications requires an upgrade to a bigger and quicker hard drive.
Most drives can be found in 5400 and 7200-rpm versions. The 5400-rpm drives are more economical than the 7200-rpm designs, but you will then lose the performance boost delivered from the 7200 version. If you need quicker gain access to times and improved data transfers, the 7200 variation is a better alternative.
You should prepare to make your brand-new drive your primary drive i.e. the new home for your OS. Due to the fact that your brand-new hard drive is larger and quicker, this merely. The old drive maybe your secondary hard drive and you might use it for archives etc
. All significant drive makers load software applications with their upgrade packages that prepare the drive for partitioning and formatting and can also copy what’s on your existing drive to the new one, helping to make the upgrade a breeze.
1. Preparation of PC
Prepare Your PC’s existing Hard Drive from future problems. Make sure the existing drive in your PC is hassle-free.
If you are able to, do not forget to make a backup of your tough drive ie. Do not forget files like normal.dot from Microsoft Word and Bookmarks or Favorites from your Web web browser.
2. Run the New Drive-Installation Software
Of all, read your new hard drive’s handbook. Nearly all hard drives ship with installation software that takes care of format and partitioning. You need to run a lot of installation software application prior to you physically set up the brand-new drive.
3. Open your PC
Turn off your computer system and unplug it prior to you get rid of the cover. Before you begin working inside your PC, put on an antistatic wrist strap.
A. Find a space. Usually, you will find an accessible space for your new disk drive beside your existing drive.
B. Find the drive. Takedown where the red wire of the cable television meets the drive (Pin 1) so you can link your brand-new cable correctly. Mark the place with masking tape.
C. Find a power connector. Additionally, you need a y-adapter if your power supply has no free connector.
For best performance, today’s drives require an 80-wire cable. Most drives ship with one.
4. Set the Drive Jumpers.
It’s advisable to install your brand-new drive as the 2nd drive on the main IDE channel. This is exactly the same channel where the present drive is linked. When two IDE drives are linked to single cable television, one must be designated ‘Master‘, and the other ‘Slave‘.
Set your brand-new disk as your PC’s boot drive, and its jumper to Master. Modification of the jumper settings on your old drive to Slave.
5. Putting together
Install the brand-new drive. Connect the 2 connectors on the new ribbon cable to both your tough disks.
Power up both drives. Inspect all your connections. Do not put the cover back on until you’re sure that whatever’s working properly.
6. Ending up
Put your installation utility disk is in the floppy drive. Make sure drives 1 and 2 are set to AUTO. If they’re not, your PC might not spot your new drive.
Conserve the setup settings. Reboot from the installation energy floppy disk. Follow the directions to establish your new drive and copy the data from the old to the brand-new one.
Eliminate the floppy and reboot your PC. After this, your PC needs to begin Windows generally. After inspecting that whatever’s working, reformat your old drive to wipe out its unnecessary information and to prepare it for brand-new files.
The most popular and probably the most convenient upgrade task for PC lovers are still the installation of a new hard drive. You must plan to make your brand-new drive your main drive i.e. the brand-new house for your OS. All significant drive makers load software applications with their upgrade sets that prepare the drive for partitioning and format and can also copy what’s on your present drive to the new one, assisting to make the upgrade a breeze.
It’s a good idea to install your brand-new drive as the second drive on the main IDE channel. Follow the directions to set up your brand-new drive and copy the data from the old to the brand-new one.